Dry Ice Blasting
The Coolest Way To Clean!
No Secondary Waste.
Sometimes the "clean-up" from your current cleaning method can be worse than the problem itself. With dry ice blasting there is no secondary waste, which saves time and money. Dry ice does the job and then disappears.
A DRY Process.
Unlike steam or water blasting, dry ice blasting will not damage electrical wiring, controls, or switches. Dry ice (frozen CO2) is transformed from a solid phase directly to a gas, eliminating the liquid phase and all associated problems. Rust formation after cleaning is far less likely with dry ice blasting.
Clean On-line.
Because dry ice blasting systems provide on-line maintenance capabilities for production equipment (online cleaning), time consuming and expensive de-tooling procedures are kept to a minimum which reduces downtime. With an Alberta oilfield background, we are well aware that time is money. With high quality service a main contributor to our success, you are sure to find our 24-hour service second to none.
Non-abrasive.
Unlike sand, walnut shells, plastic beads and other abrasive grit media, dry ice particles are non-abrasive. Cleaning with dry ice will not wear tooling, texture surfaces, open tolerances, or damage bearings or machinery.
Smart Technology
Non-Abrasive
Non-Conductive
Non-Toxic
Non-Flammable
Non-Hazardous
Dry ice blasting uses solid carbon dioxide (CO2) pellets — blasted at supersonic speeds which sublimate on impact, lifting dust, dirt, and other contaminants off the underlying layer.
So How Does It Work?
CO2 Technology Dry Ice Blasting Process
ENERGY TRANSFER
Dry ice (CO2) particles are propelled to supersonic speed on to a contaminated surface. The particles are accelerated by compressed air, just as with other blasting methods. The energy transfer cleans the contaminant without abrasion. The force of this impact is the primary means of cleaning.
1
MICRO-THERMAL SHOCK
The cold temperature of the dry ice pellets hitting the contaminant creates a micro-thermal shock (caused by the dry ice temperature of -79º C) between the contaminant and the substrate. Cracking and delamination of the contaminant occurs, furthering the elimination process.
2
GAS PRESSURE
In the final phase of blasting, dry ice pellets fracture on impact, and as the particles warm they convert to CO2 gas, which expands rapidly beneath the contaminant. This forces the contaminant off the substrate. With the sublimation of the dry ice, only the contaminant is left for disposal.
3
Environmentally Friendly Solution
Did You Know?
-
Dry ice is non-toxic, non-hazardous and inhibits mold and bacteria growth
-
Dry ice blasting is safe to use with food processing equipment
-
Dry ice blasting does not generate secondary waste
-
Dry ice blasting reduces or eliminates employee exposure to (and corporate liability from) the use of dangerous chemical cleaning agents
Other Cleaning Methods May Be Toxic
-
Sand, soda, or water blasting can leave toxic secondary waste to be cleaned up and disposed of in addition to the toxic substrate
-
Sand, soda, or water blasting can create downstream contamination that affects surrounding installations
-
Soda blasting can kill surrounding vegetation
-
Workers are exposed to potentially harmful substances through the use of chemicals and solvents
Reclaimed CO2
The dry ice we use has been recycled and purified from existing CO2 emissions from several different industrial processes. Because it is recycled, there is not additional CO2 being emitted in the atmosphere.​
Fin-Fan Cooler Cleaning
Brothers Industrial Services specializes in cooler cleaning. With a background in gas plant operations, we understand the challenges associated with process cooling.​ Compared to traditional methods, dry ice blasting is very effective in cleaning fin-fan coolers. The properties of dry ice give us the ability to penetrate deep into the tube bundle, removing contaminants untouchable with other cleaning methods.​
If you have not used dry ice blasting to clean coolers in the past, let dry ice blasting from Brothers Industrial bring your coolers “back to life.” You will see this in ways such as reduced output to louvers, VFD’s, and or pitch control. Less fan hours per cooler per year can be achieved and lower cooler outlet temperatures will bring greater efficiency
Dry ice blasting improves worker safety.
​Dry Ice Blasting eliminates the use and disposal of harmful chemicals and solvents.
​Dry ice blasting reduces costs – more thorough clean, less clean up, on-line maintenance.
​Dry ice blasting is a dry process - it is safe around electrical equipment and there are no secondary waste streams due to the sublimation of dry ice upon contact.
​Dry ice blasting will not damage equipment - dry ice particles are non-abrasive and the blasting process will not damage fins.
AFTER
BEFORE
Industrial Tube Cleaning
Dry ice blasting cleans all types of tubes without damaging surfaces, creating secondary waste or harming employees or the environment. These tubes may be found in equipment such as a furnace, OTSG, HRSG, boiler, or reformer and are meant to transfer heat. Clean tubes will improve efficiency and in turn, lower costs.
​
Dry ice blasting is a dry process and is safe around electrical equipment. The dry ice sublimates upon impact, leaving no secondary waste to be cleaned. Harsh chemicals are eliminated and the cleaning process is non-abrasive, protecting the tube surface.
Dry ice blasting is delicate on equipment and surfaces
​
Dry Ice Blasting can be used in sensitive and dangerous environments​
​
BEFORE
AFTER
Bitumen Removal
Dry ice blasting is the safest and most effective solution in removing bitumen and heavy oil from facility components. Dry ice blasting easily cleans module components including structural steel, cable trays, piping (insulated or painted), valves, insulation blankets, hand rails, walkways, grating and more.
​
More thorough clean: In the event of a bitumen spill or release, dry ice blasting can safely restore your structure, buildings and equipment to a “like-new” condition while traditional methods such as steaming and hand scrubbing often leave behind unsightly stains.
Dry ice blasting is environmentally friendly. The last thing anyone needs after a spill is adding more to the spill. Trying to contain and collect the added chemical and water is very difficult using traditional methods. With dry ice blasting, there are no secondary waste streams due to the sublimation of dry ice upon contact. Dry ice blasting does not add to the mess and Brothers uses innovative techniques to ensure that the removed bitumen is recovered.
Dry ice blasting will help in keeping your workers safe. Dry ice blasting is far more effective with less manpower. There are also fewer risks involved due to reducing the use and disposal of harmful chemicals and solvents. Dry ice blasting is also safe around electrical equipment as it is a dry process.
Dry ice blasting reduces costs – more thorough clean, less clean-up, and on-line maintenance. Dry ice particles are non-abrasive and will not damage equipment. As you can see from the videos, dry ice blasting can return equipment to “new new condition”. These results can be achieved with fewer workers and in less time.
BEFORE
AFTER
Mining Equipment Cleaning
Whether it be excavators, shovels, wheel loaders, dozers, graders, haul trucks or conveyors – broken down equipment and surface mining go hand in hand. Brothers Industrial’s mobile units can reduce downtime by providing cleaning services for equipment maintenance and repair. The quality of dry ice cleaning is far superior to manual cleaning and is achieved in far less time. Why have several mechanics struggle with scratch pads, scrapers, rags and chemical to get average results when dry ice blasting can achieve superior results in a fraction of the time?
​
Due to the environment these machines work in, pre-cleaning is necessary to perform mechanical repairs and maintenance. Installing new parts into equipment that has not been properly cleaned means less time until the next mechanical failure. Give your new bearings, bushings, rollers and other parts a fresh start to life with Brothers dry ice blasting services. Clean radiators in less time with incomparable results and easily identify cracks and deterioration in wear parts after dry ice blast cleaning.
​
As dry ice blasting is non-abrasive and moisture free, working around electric shovels, electric wheel loaders and other moisture sensitive equipment is completely safe. And since dry ice sublimates upon contact during the blasting process it does not generate secondary waste.
Dry ice blasting is non-abrasive and moisture free
​
Dry Ice Blasting can dramatically reduce downtime for equipment cleaning
​
Dry ice blasting can deliver a better result then traditional cleaning methods​
​
Mold Remediation
Dry ice blasting removes 99% of mold spores and is successful in cleaning the tight spots, around nails and other obstructions. Dry ice blasting is faster and requires less manpower than traditional methods of sanding/scraping and using biocide/chemicals.
Dry ice blasting improves worker safety – eliminates the use and disposal of biocides and chemicals.
Dry ice blasting reduces costs – more thorough clean, less clean up, less time, less manpower.
Dry ice blasting is a dry process – it is safe around electrical equipment and there are no secondary waste streams due to the sublimation of dry ice upon contact.
Electrical Component Cleaning
Dry ice blasting can restore both rotating and stationary electrical equipment to peak performance with a large decrease in downtime. Safely clean your electrical components with Brothers Industrial.
Dry ice blasting is successful in cleaning the following equipment: motors/stators, armatures/coils/windings, generators, transformers, switch gear, insulators, sub-stations, motor control centers, power distribution panels, service entrance/metering panels, buss bars/ducts, cable trays/wiring.
Dry ice blasting improves worker safety – eliminates the use of chemicals/solvents, safe around electrical equipment.
Dry ice blasting reduces costs – more thorough clean, no secondary waste, on-line maintenance
Fire Restoration
Dry ice blasting can remove smoke, char and ash from wood, brick, concrete and metal. Blasting can be done in the tight angles of trusses, around nails, wiring and all plumbing without damage to the surface integrity. Dry ice blasting is very successful at reducing and often eliminating the odor that is left behind by fire damage. There is no secondary waste created during the dry ice blasting process. There is no need to clean up the added mess of other blast medias such as soda, water and sand.
Dry ice blasting can clean even the tightest spaces and areas, ensuring no corner is missed, and all surfaces are left clean and restored.
Dry ice blasting leaves no residue or mess, saving you time and resources with cleaning that can take place after traditional chemical methods.